If you are in the market for Houston Tx metal spray and like to learn about its function, you’re in the correct place. Metal spraying is also known as thermal spraying and involves covering a diverse range of surfaces with a metallic coating. It will use a spray of molten particles. In this article, the different styles of metal spraying will be described. These styles include flame spraying, wire arc spraying, plasma spraying, cold spraying, and a few others.

Metal Spraying

This process is very versatile. Because of this, you have many options. Your choice of substrates, which means underlying substance or layer, can be seen in the list below.

Substrate choices:

• Aluminum
• Steel and stainless steel
• Copper
• Bronze

You also have the choice of your coating material, which goes over the substrate in either power or wire form.

Coating material choices:

• Tungsten carbides
• Stainless steels
• Ceramics (like aluminum oxide, chrome oxide, zirconia, and titania)
• Nickel and chrome carbides
• Pure metals like zinc, aluminum, and copper

Flame Spraying

Flame spraying is an industrial coating process that consists of a high-pressure flame and a coating material. The coating material is usually in a powder or wire form. It is sprayed at a high velocity so it melts. Once completed, flame spraying helps to improve the performance of the component.

Cold Spraying

Cold spraying is unlike thermal spray coating in the way that the coating materials are not melted by a thermal source. Instead, we use high-pressure gas. Next, it is used over powder material to help it reach critical velocity. After this, supersonic nitrogen and/or helium gas propels solid powder particles onto the component at high speeds. Cold spraying ensures little to no oxidation buildup during the process and very dense coating. It is in use for aerospace, medical, and electronic industries.

Plasma Coating

Plasma coating is when an electrical arc is ignited and the gases within it are ionized to become a plume of hot plasma. When the coating material is moved through the gas plume, it is melted onto the substrate as a thermal spray. This forms the plasma coating. The results are repeatable and predictable due to the accurate regulation of the applied current. The distance of the plasma gun from the substrate keeps the component at a controlled thermal spray temperature that is usually in the range of (100°F to 500°F). With a plasma coating, you will also have a choice of coating materials such as metal alloys, ceramics, and carbides. There is a low affected heat zone and therefore low component distortion. This process can be fully automatic with robotic equipment.

Wire Arc Spraying

Wire arc spray is a form of thermal spraying where two consumable metal wires are fed into the spray gun. The wires are then charged and an arc is generated between them. The heat from the arc will melt the incoming wire. This will entrain into an air jet from the gun. Once this has started, the molten feedstock is then deposited onto a substrate with compressed air. Use this process for heavy metallic coatings.

Other Metal Spraying Techniques

If you are still curious, there are even more styles of metal spraying. This includes detonation spraying, warm spraying, and HVAF or HVOF.

HVOF stands for High-Velocity Oxy-Fuel coating. HVAF is high-velocity air fuel. Warm spraying is very similar to cold spraying but modified. Detonation utilizes a powder charge.

Why Fusion, Inc.?

Fusion Houston

Fusion, Inc. founded in Houston in 1959. It is a job shop which specializes in machining, coating, grinding, and rotating and reciprocating components. We have a full range of O.D. – (up to 96″ swing x 37′), and Vertical grinding capacity (80″ swing x 70” under the rail and 48” stroke) with a crane capacity of 80,000#. Our combined experience of over 100 years with engineering, sales, and technical ability means we can provide you with the highest quality service.

Spray coating is not the only service Fusion, Inc. offers to you. They also perform:

• Machining and Grinding
• HVOF (High-Velocity Oxy-Fuel) Coatings
• Twin Arc Coatings
• Combustion Wire Coatings
• And of course, Plasma Coatings

If you’d like to know who the higher-ups are, you can speak to their Vice President and Senior of Sales. Thomas Niederberger is the VP of Sales and Customer service, and be contacted at tniederberger@fusionhouston.com. Jeff Fenner is the Sr. Sales and Marketing Director and can be contacted at jfenner@fusionhouston.com.

A Fusion, Inc. expert hard at work

All About Houston

Fusion, Inc. is located in Houston, Tx.

• Houston is the largest city in Texas, boasting a population of over 2 million people.
• Because of this, that population count makes Houston the fourth most populous city in the U.S.
• Houston was founded on August 30, 1836, by two brothers. Their names were Augustus Chapman Allen and John Kirby Allen.
• City residents can speak over 145 languages. It is very ethnically diverse.
• Eight counties exist within the Houston-Galveston-Brazoria Consolidated Metro Statistical Area (Houston CMSA). Brazoria, Chambers, Fort Bend, Galveston, Harris, Liberty, Montgomery, and Waller.
• The Houston-Woodlands-Sugar Land MSA covers 10,062 square miles.
• Houston boasts many championship winning sports teams, such as the Astros and the Rockets.

To learn more about Houston, you can visit their official government website here.

Contacting Fusion, Inc.

Fusion Inc. is located at 6911 Fulton, Houston, Texas. We occupy a 65,000 square foot overhead crane served to build on approximately 4 acres. The facility has a lifting capacity of up to 40 tons or 80,000 pounds.

6911 Fulton Street Houston, TX 77022
Phone: (713) 691-6547
Fax: (713) 699-1003
Web:www.FusionHouston.com

Now that you’ve learned about the different kinds of metal spray coating, you can better consider your options. What have you learned? Furthermore, do you require our services? If you have any more questions, contact the professionals above. They certainly know more about the topic. You will be completely safe and informed by their qualified professionals.

Lastly, we’d like to take a moment to thank you for visiting our site and learning about our great company. Whatever you need, we can cover you! Choose Fusion, Inc. for all of your metal spraying needs!

It’s time you prepare yourself for Houston Tx metal spray!