© 2024 Fusion Inc. All Rights Reserved. | Optimized by Actual SEO Media | Sitemap
Houston TX Flame Spray Coating can do wonders for the preservation of your components, have you gotten your parts coated? When it comes to a good coating, Fusion has options that will offer benefits across the board. Whether it is rotating or reciprocating components, we can provide coatings to increase its protective resilience.
In this article, we want to showcase a couple of the flame sprays that Fusion works with and explain how they function. If you have any questions perhaps have an interest in using our services in your project, feel free to go ahead and visit our site for more or seek our contact information below.
High-Velocity Oxygen Fuel
One of the flame spray coatings we use is the HVOF. They use high-temperature flames to coat your components in a unified low porous material. This is a very beneficial option because they can produce clean and dense coats that carry fine homogenous structures.
HVOF’s popularity stems not only its thick coat but also its increase in cost-effectiveness for your equipment, which we will touch on later. Below, we will explain that process and tell you how our company works with HVOF technology. We will also touch on some of the features of the coat and the benefits of receiving an HVOF coat.
The acronym HVOF stands for High-Velocity Oxygen Fuel (HVOF). For this method, a fuel-oxygen mixture is fed into a combustion chamber. From there it generates a highly pressurized current which the coating powder is led through.
After pumping it through at high-speed, the powder is melted finely. It will hit the substrate at around 3,200 feet per second. These coatings carry very low internal stress and do not have to have normal levels of thickness like other industrial coatings. The result is a very dense coat that has low porosity and incredibly high bonds that can withstand over 12,000 PSI.
HVOF and how it works.
Combustion Wire Coatings
The combustion process in this type of spray is where you will actually see the flame at work. Precise combinations of oxygen and fuel acetylene are used to ignite a flame at the nozzle of the gun. The combustion is created by running a metal alloy, which is a mixture of two different elements, through the flame by a compressed stream of air out of the spray gun.
The molten material that is formed is propelled toward the target to be coated. These coatings can be ground or machined to final dimensions of the finish. It will be based on the desires of the manufacturer, of course.
We can apply a wide range of metal alloys, but also pure metals as well. These coatings are typically used for dimensional restoration or corrosion resistance of a component. The results are great for temperature sensitive parts as there is no heat affected zones or sites of component distortion.
Get the highest quality coating materials for your parts
Benefits Of A Flame Spray Coating
As you may be aware, there are several different types of coating that we can apply. Selecting between them is a matter of utility and cost-effectiveness. Below, we will explain why our coating processes are an excellent choice for whatever project you’re working on. Fusion will truly bring the best out of your components when we’re through with them.
Cost and Longevity
When running a business, we understand that you are always focused on cost. Ensuring that your components have an elongated lifetime can mean two things. Reduction in the number of repairs or replacements needed, for one. As well as an increase in the long-term profitability of that piece over time. With an effective coating from Fusion, you can certainly generate both from each part we coat.
Improved Performance and Efficiency
Due to the impact that a good coating job can provide, your equipment will receive huge increases in resistance and durability. The benefits to coating from a performance standpoint regards the minimized friction between parts. With the new coat, your unit will be able to handle the forces affecting it much more efficiently.
Protection
While performance is preserved and in some degrees enhanced, the main point of the coat is for protection of the component. With a thick layer of coating around the part, it will be resistant to the corrosive properties of chemicals, oils, gases, or other elements that your particular industry may come into contact with.
Once you come in for a consultation, you will have a better understanding of what you need for your equipment. We will ensure that you will leave our offices satisfied with your coatings.
Fusion Inc. has vast experience in the spray process for plasma coatings and flame spray coatings for Houston TX.
Get The Best Houston TX Flame Spray Coating From Fusion, Inc.
When it comes to spray coating of any kind, we have some of the most competent personnel in the industry. Under our care, you will find that we have a combined experience of 100+ years in engineering, sales, and technical ability to offer. Whatever the nature of the project you are completing, our services are always going to be outstanding and efficient. We can ensure the future success of your components with the protection our coatings will provide.
Contact Us
While you are considering investing in spray coating services, give Fusion a call at (713) 691-6547. If you would prefer to send us an email, visit our contact page here. At Fusion, we aim to provide you with long term benefits and solutions. After consulting with us, we hope that you have a better understanding of what our services can do for you. We can help you select your best options and get started with you fully informed. At Fusion Inc., we pride ourselves on the quality of our work and the scope of our capabilities, which you can view here. We can provide the best Houston TX Flame Spray Coating service you will be able to find.
Fun Facts About Houston
- Houston residents eat out more than the residents of any other city in the nation, and who wouldn’t? Considering the number of fantastic restaurants here, I think we are more than justified.
- Houston is home of the Johnson Space Center. This led to the nickname “Space City”.
- Our city is one of the rainiest cities in the nation, with our annual rainfall reaching over 60 inches every year.
- To learn more about Houston, click here!
Houston TX Flame Spray Coating can do wonders for the preservation of your components, have you gotten your parts coated? When it comes to a good coating, Fusion has options that will offer benefits across the board. Whether it is rotating or reciprocating components, we can provide coatings to increase its protective resilience.
In this article, we want to showcase a couple of the flame sprays that Fusion works with and explain how they function. If you have any questions perhaps have an interest in using our services in your project, feel free to go ahead and visit our site for more or seek our contact information below.
High-Velocity Oxygen Fuel
One of the flame spray coatings we use is the HVOF. They use high-temperature flames to coat your components in a unified low porous material. This is a very beneficial option because they can produce clean and dense coats that carry fine homogenous structures.
HVOF’s popularity stems not only its thick coat but also its increase in cost-effectiveness for your equipment, which we will touch on later. Below, we will explain that process and tell you how our company works with HVOF technology. We will also touch on some of the features of the coat and the benefits of receiving an HVOF coat.
The acronym HVOF stands for High-Velocity Oxygen Fuel (HVOF). For this method, a fuel-oxygen mixture is fed into a combustion chamber. From there it generates a highly pressurized current which the coating powder is led through.
After pumping it through at high-speed, the powder is melted finely. It will hit the substrate at around 3,200 feet per second. These coatings carry very low internal stress and do not have to have normal levels of thickness like other industrial coatings. The result is a very dense coat that has low porosity and incredibly high bonds that can withstand over 12,000 PSI.
HVOF and how it works.
Combustion Wire Coatings
The combustion process in this type of spray is where you will actually see the flame at work. Precise combinations of oxygen and fuel acetylene are used to ignite a flame at the nozzle of the gun. The combustion is created by running a metal alloy, which is a mixture of two different elements, through the flame by a compressed stream of air out of the spray gun.
The molten material that is formed is propelled toward the target to be coated. These coatings can be ground or machined to final dimensions of the finish. It will be based on the desires of the manufacturer, of course.
We can apply a wide range of metal alloys, but also pure metals as well. These coatings are typically used for dimensional restoration or corrosion resistance of a component. The results are great for temperature sensitive parts as there is no heat affected zones or sites of component distortion.
Get the highest quality coating materials for your parts
Benefits Of A Flame Spray Coating
As you may be aware, there are several different types of coating that we can apply. Selecting between them is a matter of utility and cost-effectiveness. Below, we will explain why our coating processes are an excellent choice for whatever project you’re working on. Fusion will truly bring the best out of your components when we’re through with them.
Cost and Longevity
When running a business, we understand that you are always focused on cost. Ensuring that your components have an elongated lifetime can mean two things. Reduction in the number of repairs or replacements needed, for one. As well as an increase in the long-term profitability of that piece over time. With an effective coating from Fusion, you can certainly generate both from each part we coat.
Improved Performance and Efficiency
Due to the impact that a good coating job can provide, your equipment will receive huge increases in resistance and durability. The benefits to coating from a performance standpoint regards the minimized friction between parts. With the new coat, your unit will be able to handle the forces affecting it much more efficiently.
Protection
While performance is preserved and in some degrees enhanced, the main point of the coat is for protection of the component. With a thick layer of coating around the part, it will be resistant to the corrosive properties of chemicals, oils, gases, or other elements that your particular industry may come into contact with.
Once you come in for a consultation, you will have a better understanding of what you need for your equipment. We will ensure that you will leave our offices satisfied with your coatings.
Fusion Inc. has vast experience in the spray process for plasma coatings and flame spray coatings for Houston TX.
Get The Best Houston TX Flame Spray Coating From Fusion, Inc.
When it comes to spray coating of any kind, we have some of the most competent personnel in the industry. Under our care, you will find that we have a combined experience of 100+ years in engineering, sales, and technical ability to offer. Whatever the nature of the project you are completing, our services are always going to be outstanding and efficient. We can ensure the future success of your components with the protection our coatings will provide.
Contact Us
While you are considering investing in spray coating services, give Fusion a call at (713) 691-6547. If you would prefer to send us an email, visit our contact page here. At Fusion, we aim to provide you with long term benefits and solutions. After consulting with us, we hope that you have a better understanding of what our services can do for you. We can help you select your best options and get started with you fully informed. At Fusion Inc., we pride ourselves on the quality of our work and the scope of our capabilities, which you can view here. We can provide the best Houston TX Flame Spray Coating service you will be able to find.
Fun Facts About Houston
- Houston residents eat out more than the residents of any other city in the nation, and who wouldn’t? Considering the number of fantastic restaurants here, I think we are more than justified.
- Houston is home of the Johnson Space Center. This led to the nickname “Space City”.
- Our city is one of the rainiest cities in the nation, with our annual rainfall reaching over 60 inches every year.
- To learn more about Houston, click here!