Crankshaft Grinding Services Near Me Houston

Have you been searching for crankshaft grinding services near me Houston, but have not found an industrial machine shop that can meet your needs? Perhaps you are looking for an industrial machine shop that can repair your crankshaft. But also have the capabilities of grinding your crankshaft as well. Maybe you are also looking for an industrial machine shop that has industrial coating services as well. Here at Fusion, Inc., we have got all your needs covered.

Here at Fusion, Inc., we have been serving the greater Houston area since 1959. We are Houston’s premier job shop specializing in the machining, coating, grinding, and finishing of rotating and reciprocating components. Did you know that we have over 100+ years of experience? Because of this, we will be able to provide you with the highest quality of service.

We offer a wide array of services because we strive to provide all the solution to your industrial equipment challenges. Need your crankshaft repaired? We can do that. Are you looking for machining and grinding services? If so, we can handle that also. Not only that, but we also provide HVOF coatings, twin arc coatings, combustion wire coatings, and plasma coatings. We also have the knowledge and expertise to service mud motor rotors, wind turbine main shaft and components, and gas steam turbines. When even manufacturer taper gauge sets. If you are looking for these capabilities or services, contact Fusion, Inc. today by dialing 713-691-6547. Or visit our website at https://www.fusionhouston.com/ to see what we are all about.

Crankshaft Grinding Services

Do you have a crankshaft that needs grinding services? If so, here at Fusion, Inc. we have the capabilities to ensure that your crankshaft is restored to its original or improved condition. So, that you are able to get back to work. We have the abilities to accommodate user diameter grinding up to 96 inches swing, with 37 feet between centers. Along with inner diameter grinding up to 60 inches and a depth of 60 inches. They also have the ability to accommodate machining up to 82 inches in diameter and 26.5 feet between centers.

We also have the ability to manufacture repack and new components per sample or print. Our machine and grinding equipment consist of-

• Lathes
• Surface grinding
• OD grinders
• ID grinders
• Taper grinding
• Straightening
• Horizontal and vertical mills
• Drill presses
• OD and ID honing
• Hydraulic press

If you are looking for crankshaft grinding services near me Houston that will ensure that your crankshaft is working even better than before. Give Fusion, Inc. a call today at 713-691-6547 or visit https://www.fusionhouston.com/. We have put together a team that truly know hows to repair and treat equipment to ensure it is working like new again. Our team of professionals is standing by to answer any questions you may have.

Crankshaft Repair

Do you have a crankshaft that is in need of repairs? Maybe it is not working as efficiently as before and you want a professional to check it out. Here at Fusion, Inc. we will work with you to diagnose the problems with your equipment and repair it. We repair industrial crankshafts with the following specifications: between Center Capacity 37′, Swing Capacity 96“, Weight Capacity 80,000 lbs, Machine Center, and Maximum 20“ Stroke.

We have 59 years of experience servicing and repairing crankshafts. Because of this, we will provide the best services to ensure that any crankshaft is working like new again. All you need to do is give our expert team a call today at 713-691-6547 and let us know how we can help you.

Twin Arc Coatings

Have you been searching for an industrial machine shop that can handle industrial coatings? Here at Fusion, Inc., we have the capabilities to handle HVOF coatings, twin arc coatings, combustion wire coatings, and plasma coatings. The twin arc wire process uses two metallic wires. These two wires are electrically charged and are fed into the arc gun. When the wires are brought together at the contact point, the opposing charges are able to generate enough heat to constantly melt the tips of the wires. Which then allows the coating to be projected onto the equipment.

The benefits of twin arc coatings are many and include that the process of coating applies a range a metallic alloys and pure metals. This allows for restoration and corrosion resistance of the equipment. During the coating process, there is no component distortion and it produces coatings that are easily ground or machined.

If you are looking for any type of coatings for equipment, Fusion, Inc. is here to help. We have an expert team standing by that will be able to ensure your equipment is coated properly. Contact Fusion Houston today by calling 713-691-6547 and see how coatings can have a difference on your components. Also, visit our website https://www.fusionhouston.com/ to see a full list of coating services we have to offer.

Contact Fusion, Inc. Today!

When you are looking for the best crankshaft grinding services near me Houston you can trust the professionals at Fusion, Inc. to help you. Houston has trusted us for the past 59 years because we take pride in the service we deliver to our customers. We understand that equipment is expensive. Which is why we work to ensure that your equipment is working like new again. Start getting the help you need by dialing 713-691-6547. Or visit our website https://www.fusionhouston.com/ to see what we are all about!

Fun Facts About Houston Texas

• “Houston” was the first word spoken by Neil Armstrong on the moon.
• The Houston Museum of Fine Arts is the largest art museum in the state.
• The Astrodome is the first multi-use domed stadium in the entire world.
• The Houston Rodeo attracts a larger crowd than any rodeo in the world.
• To learn more about Houston click here.